HIGHLIGHTS
SUMMARY
This paper aims to show the successful use of PVD sputtering for the metallization of 3D-printed GFRPs from recycled composites. PVD Sputtering and Surface Characterization Four different batches of minimum two samples were then produced to assess the influence of 3D printing, post-processing, and chromium metallization on the surfaces, as better explained in Section 3.1. The PVD sputtering deposition was carried out by Novellini S.p.a.-Divisione Green Coat with a proprietary process (San Benedetto Po, Italy), following the same procedure used for the metallization of FFF 3D-printed samples . . .
If you want to have access to all the content you need to log in!
Thanks :)
If you don't have an account, you can create one here.